General Instructions; Standby Mode; Signal Strength - Siemens SXG75 User Manual

General instructions

Standby mode

The phone is in standby mode and is
ready for use when the name of the
service provider appears on the dis-
play.
B
Press and hold the
On/Off/End key to return
to standby mode from
any situation.
The following information might be
displayed:
Logo
If logo or wallpaper is enabled
(page 113) logo is displayed.
CB messages
If CB display is enabled (page 74) a
CB ticker with the latest CB message
is displayed, scrolling horizontally if
needed. The CB ticker is only availa-
ble if the alert region is not used, i.e.
there are no current events.
General instructions
Alert region
In the alert region above the softkeys
the following message types can be
displayed:
• New entries in missed calls list,
voice mail or inbox.
• New content via IrDA/Bluetooth.
• Missed calendar events.
The number of new entries is
displayed (e.g. 1 Missed call).

Signal strength

Z
Strong signal.
[
A weak signal reduces the
call quality and may lead
to loss of the connection.
Change your location.
If phone cannot obtain network serv-
ice after 15 minutes the power save
mode is used. The phone only
attempts to acquire service in
intervals.
17