Siemens S55 Manual page 100

K K
§Menu§ Setup
K
Data services
K
Select function.
Fax/data mode using a PC
With the phone and a connected PC,
you can transmit and receive faxes
and data. Appropriate software for
fax and data communication must
be available on your PC and there
must be a connection to the phone.
Fax and data services must be en-
abled by the service provider. There
are variations in fax and data recep-
tion, depending on the network.
Please ask your service provider
about this.
Set the required mode.
§Edit§
Rec fax/data
Your service provider has given
you a number for telephoning and a
fax/data number.
The call is signaled by a special ring-
tone and the type of call (fax or data)
is displayed.
Now start the communication pro-
gram on your PC to receive the fax/
data.
Setup
Connectivity
L
Send vce/fax
Set this function on the phone before
transmission so that you can switch
from voice mode to fax mode.
While the connection is being set up,
the following function is available
for two seconds:
Switch to
§Voice/fx§
mode; you may now send
a fax.
Voice/fax rec
(Only if a special fax or data number
is not available).
Start the required communication
program on your PC and select the
function on the phone during the call
(the PC will take over the connec-
tion).
End transmission
End transmission with PC software
B
and/or press
Authentication
Activate encrypted WAP
§Edit§
dial-up (CHAP Challenge
Authentication Proce-
dure) or deactivate it (PAP
Personal Authentication
Procedure).
L
Send vce/fax
.
99