Table of Contents
Advertisement
68
Message setup
The period during which you can
First
receive this kind of confirmation
Enter the Setup menu
corresponds to the validity time
by pressing »MENU«
selected by you in the Message
Select »Message setup«
setup menu.
Signature You can add a signature
Send SMS setup
(Continued)
to be sent automatically at the end
of your SMS messages.
Reply path
For messages that
have to be sent to the recipient via
Broadcast setup
several service centres, some net-
works offer the feature of forward-
To be able to receive broadcasts you
ing a reply, if any, back to you
must enter Broadcast setup which
through the same chain of service
gives you the following options:
centres. This is called a reply path,
and activating it may speed up the
Activation Select whether you
delivery time for a reply.
want the broadcast function to be
Contact your network operator for
activated.
further information.
Channels Set up a list covering the
Confirmation
Select »Confir-
kind of information you wish to
mation on« if you want a confirma-
receive. The phone will show you
tion from the network operator
various options for storing the indi-
when your message has been sent
vidual channels.
to the recipient.
Pressing »EDIT« will give you a
If the message has not been sent
range categories from which you
you will get the information that it
can select the one(s) you want to
is either queued or not delivered.
receive.
Setup menu
Language
Some network opera-
Browser Menu
tors offer broadcast messages in
The connection to the WAP gate-
different languages. Select
way is established as a data call via
between different languages or
an access point. You must enter the
simply select all languages.
dial number of this access point in
the »Profile setup« below.
Sorting
Specify whether your messages in
access point and the gateway
your inbox, outbox or sent items
takes place automatically when you
should be sorted by date and time,
have entered the IP address of the
by subject or by sender.
gateway as mentioned below.
ator has already stored this infor-
mation in your phone. If not, you
must select the "Profile setup"
menu and enter the data
Display setup Select whether you
want the title of the displayed card
to be shown in the first line of the
display or not.
Profile setup This is where you set
up your WAP connection. You can
Facts & Tips
store up to 8 different profiles, each
• For more information on broadcasts,
with an individual setup.
see p. 48.
Setup menu
• Add profile: Select this submenu
to add a new profile. Enter any of
the following parameters:
Note: The minimum number of
parameters required are dial-up
number and IP address.
• The name of the profile
Communication between the
• The supplied dial-up number
• The connection type (analog or
ISDN)
• The data speed (9600 or 14440)
• The supplied user name
It is likely that your network oper-
• The supplied password
• The IP address (use the
key for decimal commas)
• The port number
yourself.
• The name of your Homepage for
this profile. (Like the start page
on your PC).
• The idle time. Set the period (in
seconds) after which you will be
disconnected after your last key-
stroke.
69
• View profiles: Select this sub-
menu to view any stored profiles.
Press »SELECT« to view the con-
tents of a specific profile.
By pressing »OPTION« you can
choose to edit or delete the select-
ed profile.
-
Facts & Tips
• Contact your network operator or
special WAP gateway provider for fur-
ther information on how to set up the
WAP browser.
• Permission to view, add or change
the WAP profiles might be restricted
by your network operator.
Advertisement
Table of Contents
