Getting Started; Insert Sim Card/Battery - Siemens M75 User Manual

Getting started

The phone is packaged in dismantled
form and must be re-assembled prior
to using for the first time.
In rare cases, static discharge may
cause discolouration at the edges of
the display. However, this will disap-
pear within approx. 10 minutes.

Insert SIM card/battery

The service provider supplies you
with a SIM card on which all the im-
portant data for your line is stored. If
the SIM card has been delivered in
credit-card size, snap the smaller
segment out and remove any rough
edges.
• Place the SIM card flat in front of
the slot with the contact surface
facing downwards. Then push
Your phone's
display is sup-
plied with a
protective film.
Remove this
film slowly be-
fore assem-
bling the
phone.
Getting started
the SIM card in using gentle pres-
1
sure (ensure that the cham-
fered corner is in the correct
position).
1
• To remove the SIM card push the
latch downwards
the SIM card in shown direction
3
. Please do not use any tools.
• Insert the battery sideways
into the phone
5
downwards
position.
4
• To remove the battery, pull it out
with the retaining tab on the side.
2
3
2
and pull out
4
, then press it
until it clicks into
5
9