Sms (Text Messages); Writing/Sending/Saving Sms; Receiving/Reading Sms; Managing Sms Lists - Gigaset C450 IP User Manual

SMS (text messages)

SMS (text messages)
Your unit is supplied ready for you to send
SMS messages immediately.
When an SMS is sent, the base station
automatically establishes a connection via
the fixed network.
Requirements:
u
Calling Line Identification (CLIP) has
been enabled for your telephone con-
nection.
u
Your network provider supports SMS in
the fixed network (information on this
can be obtained from your network
provider).
u
You are registered with your service
provider to send and receive SMS.
Please note:
When you call up the SMS menu for the first
time, you are automatically registered with
accessible SMS centres whose number you
have entered. You can then receive SMS from
these SMS centres.
You can enter further SMS centres and register
with them with the help of the registration
wizard. To find out how to do this, please read
the full user guide for your Gigaset C450 IP
(page 5).

Writing/sending/saving SMS

An SMS may contain up to 160 characters.
¢ ¢
SMS Write Message
§Menu§
~
Write an SMS.
Send Text
§Menu§
Select and press
s / ~
Enter the number with dialling
code (including your local area
code) from the directory or key
it in manually, and press
For SMS to an SMS mailbox:
put the mailbox ID at the end
of the number.
The SMS is sent.
22
.
§OK§
.
§OK§
Or:
¢
Save Text
§Menu§
Select and press
The SMS is saved in the draft
message list. You can later edit
and send it.
Opening the draft message
list:
§Menu§
.
Please note:
If you are interrupted by an external call whilst
writing the SMS, it is automatically saved in
the draft message list.

Receiving/reading SMS

All received SMS messages are saved in
the message list. Linked SMS messages
are divided into individual SMS messages
with a maximum of 153 characters, and
saved as such in the incoming message
list.
New SMS messages are signalled on all
Gigaset C45 handsets by a message in the
display, the flashing message key f and
an advisory tone.
Reading a text message
¤
Open the incoming message list with
the message key f (page 21) or via
¢ ¢
SMS
Menu§
¤
Select SMS
¤ ¢
Select
Read SMS
Menu§

Managing SMS lists

You can use the incoming message and
draft message lists to, e.g.:
u
Delete individual SMS or the entire list
u
Forward or reply to an SMS
¤
Select SMS and press
menu.
For additional information, please see the
full user guide for your Gigaset C450 IP
on the Internet at
www.siemens.com/gigaset.
.
§OK§
¢ ¢
SMS Outgoing.
Incoming 01+05.
and press
OK§
to open the
§Menu§
.