Table of Contents
Advertisement
90
Setup
HTTP profile
The phone default setting varies
from service provider to service
provider.
• The settings have already been
implemented by the provider. You
can start immediately.
• Access profiles have already been
created by your provider. Then se-
lect and activate profile.
• The access profiles must be
configured manually.
If necessary, check with your service
provider for details. You will find the
current settings for the service pro-
vider in the Internat at this address:
www.siemens.com/
mobilephonescustomercare
(p. 124).
Make the settings.
I
Authentication
Activate or deactivate encrypted
WAP dial-up (CSD connections only).
Fax/data
Fax/data mode using a PC
With the phone and a connected PC,
you can transmit and receive faxes
and data. Appropriate software for
fax and data communication must
be available on your PC and there
must be a connection to the phone.
Fax and data services must be ena-
bled by the service provider. There
are variations in fax and data recep-
tion, depending on the network.
Please ask your service provider
about this.
Send voice/fax
Set this function on the phone before
transmission so that you can switch
from voice mode to fax mode.
b
Advertisement
Table of Contents
