Siemens C60 User Manual page 71

70 Setup
Not reachable
Divert occurs if phone is switched off
or is out of range.
No reply
A call is only diverted after a delay
that is determined by the network.
The period can be set to a maximum
of 30 seconds in 5 second intervals.
Busy
Divert occurs if a call is in progress. If
Call waiting is activated (p. 68), you
will hear the call waiting tone during
a call.
Status check
You can check the current divert sta-
tus for all conditions.
After a short pause, the current situ-
ation is transmitted by the network
and displayed.
p
Condition set.
o
Not set.
s
Display if status is
unknown (e.g. with a new
SIM card).
Clear all
All set diversions are cleared.
Additional notes
Note that the divert is stored in the network
and not in the phone (when the SIM card is
changed for example).
Check condition or delete it
First select the condition.
§Select§
Check status
Or
Delete
Reactivate divert
The last divert has been stored. Proceed as
with Setting. The stored phone number is
displayed. Confirm phone number.
Edit phone number
Proceed as with "Set divert". When the
stored phone number is displayed:
§Delete§
Enter new number and confirm.
b
Press.
Select.
Select.
Press. The phone number is
deleted.