Charge Battery - Siemens C60 User Manual

Charge battery

The battery is not fully charged
when delivered. Plug charger cable
into the bottom of the phone, plug
power supply unit into a mains
power socket and charge for at least
two hours.
Display when charging is in progress
h
During charging.
Charging time
An empty battery is fully charged
after about 2 hours. Charging is only
possible within a temperature range
of +5 °C to +40 °C. If the tempera-
ture rises/falls 5 °C above/below this,
the charge symbol flashes a warn-
ing. The voltage specified on the
power supply unit must not be
exceeded.
Getting started
Charge icon not visible
If the battery was fully discharged,
the chargin symbol will not be
immediately visible on connection to
the power supply unit. It will appear
after up to two hours. In this case the
battery is fully charged after 3-4
hours.
Only use the charger provided!
Display while in service
Charge level display during opera-
tion (empty-full):
a d g
A beep sounds when the battery is
nearly empty. The charge level of the
battery is displayed correctly only
after uninterrupted charging/dis-
charging. You should therefore not
remove the battery unnecessarily and
where possible not finish the loading
process prematurely.
Additional notes
The power supply unit will become heat up
after extended use. This is normal and not
dangerous.
11