Sony BVP-900 Operation Manual page 22

Setting Up the Camera
Adjusting the angle of the hood
Indoor-use hood
Outdoor-use hood
Adjusting the angle of the hood
• You can change the angle of the outdoor-use hood by
30 degree upward or downward.
• You can adjust the friction of the outdoor-use hood
with the screw on the side of the hood. The friction
increases as the screw is turned clockwise, and the
hood becomes hard to move, while the friction
decreases as the screw is turned counterclockwise,
and the hood can easily be moved.
20 (E)
Note on using the viewfinder
If the S/N of the return video signal is extremely
degraded because of use of a long triax cable or a
noisy signal being supplied to the RET IN connector of
the camera control unit, the box cursor, safety zone,
center marker, and zoom position indicator displayed
on the viewfinder screen may be distorted when the
return video signal is displayed on the viewfinder.
In such a case, turn off these display items.
Screw