Advertisement
MAINTENANCE
Careful maintenance ensures a tight seal between the sleeve and nozzle,
improving sound quality and product safety.
Keep the earphones and sleeves as clean and dry as possible.
To clean sleeves, remove them from earphones, gently rinse in
warm water and air dry. Foam sleeves require a longer drying
time. Inspect for damage and replace if necessary.
Ear sleeves must be completely dry before reusing.
Wipe the earphones and sleeves with mild antiseptic to avoid
infections. Do not use alcohol-based disinfectants.
Do not expose earphones to extreme temperatures.
Replace the sleeves if they do not fit properly.
Do not attempt to modify this product. Doing so will void the
x
warranty and could result in personal injury and/or product failure.
TECHNICAL SPECIFICATIONS
Transducer type
Dual low mass/high energy
Sensitivity (at 1kHz)
122 dB SPL/mW
Impedance (at 1kHz)
110 W
Output connector
Gold-plated 3.5 mm (1/8-inch) stereo plug
Cable length
155 cm (61")
Net weight
31 g (1.1 oz.)
Operational temperature
-18° C to 57° C (0° F to 135° F)
Storage temperature
-29° C to 74° C (-20° F to 165° F)
FURNISHED ACCESSORIES
• Premium Carrying Case
• Fit Kit: contains soft foam, soft flex and triple flange sleeves plus
cleaning tool
• Stereo Adapter Plug - 1/4 in. (6.5mm) to 1/8 in. (3.5mm)
CUSTOM EARPHONE SLEEVES
Those who use earphones regularly for extended periods of time often find
custom-fit molded sleeves offer the best comfort and sound isolation.
Ask a Hearing Health Care Professional about creating custom molded sleeves
for your earphones. For more information, contact:
Sensaphonics Hearing Conservation Toll Free: (877) 848-1714
660 N. Milwaukee Avenue In Chicago: (312) 432-1714
Chicago, IL 60622
e-mail: saveyourears@sensaphonics.com
www.sensaphonics.com
ACCESSORIES
For information about earphone accessories (listed below) and other Shure
products visit: www.shure.com
• Replacement Sleeves
• Extension Cable
• Carrying Case
• Push To Hear (PTH Module)
• Adapters
• Volume Control
CERTIFICATION
Eligible to bear CE marking.
Conforms to European EMC Directive 89/336/EEC.
Meets applicable tests and performance criteria in European Standard
EN 55103 (1996) Parts 1 and 2, for residential (E1) and light industrial (E2)
environments.
Advertisement
