Table of Contents
Advertisement
Headphone volume control
1
Adjusts the headphone volume.
2
Daisy chain sockets
Minicon socket for connection and
through-connection of the console bus.
The sockets are interchangeable; either
one may be used as an input or an output.
3 Setting Up
3.1 General Notes
A functional system consists of a power supply unit, a chairman console, up to 59 delegate consoles and the
necessary connection cables. All necessary cables for the basic system are included with the various
components.
The following general rules must always be observed when setting up the system:
• Always switch off the power supply unit before connecting or disconnecting consoles or bus cables.
• Do not connect more than 15 consoles per Minicon socket (on the power supply unit or Floor-X
adapter).
• Do not connect more than 60 consoles per system.
• The length of a console-bus branch must not exceed 40 m.
• The total cable length from the power supply unit to the last console must not exceed 80 m.
It is immaterial in which order the components are connected within the daisy chain. For example, the
chairman console does not have to be connected as the first console: it can be connected to the console
bus at any desired position.
If desired, the console bus can be connected as a loop. This improves the operational reliability since the
consoles will still have a functional connection in the case of a cable breakage within the loop.
7
2
1
3
Rear view
Headphone socket
3
1/8" stereo headphone socket. The
console speaker switches off when you
connect headphones.
CAUTION: Use only stereo plugs!
English
Advertisement
Table of Contents
