Advertisement
IMPORTANT SAFETY
INFORMATION
General Safety Rules
WARNING
warnings
Failure to follow the warnings and
instructions may result in injury.
Save
instructions for future reference.
1.
Work area safety
a. Keep work area clean and well
lit. Cluttered or dark areas invite
accidents.
b. Keep children and bystanders
away while operating.
Distractions can cause you to lose
control.
2.
Personal safety
a. Stay alert, watch what you are
doing and use common sense
when operating a tool. Do not
use while you are tired or under
the influence of drugs, alcohol
or medication. A moment of
inattention while operating tools
may result in serious personal
injury.
b. Use personal protective
equipment. Always wear ANSI-
approved eye protection. Safety
equipment such as dust mask,
non-skid safety shoes, hard hat,
or hearing protection used for
appropriate conditions will reduce
personal injuries.
c. Do not overreach. Keep proper
footing and balance at all times.
This enables better control of the
power tool in unexpected situations.
Item 63647
Read
all
and
instructions.
all
warnings
For technical questions, please call 1-888-866-5797.
3.
Tool use and care
a. Do not force the tool. Use the
correct tool for your application.
The correct tool will do the job
better and safer at the rate for
which it was designed.
safety
b. Maintain tools. Check for
misalignment or binding of
moving parts, breakage of parts
and any other condition that may
and
affect the tool's operation. If
damaged, have the tool repaired
before use. Many accidents are
caused by poorly maintained tools.
1.
Maintain labels and nameplates on
the tool. These carry important safety
information. If unreadable or missing,
contact Harbor Freight Tools for a
replacement.
2.
This product is not a toy. Keep it out
of reach of children.
3.
The warnings, precautions, and
instructions discussed in this
instruction manual cannot cover all
possible conditions and situations that
may occur. It must be understood
by the operator that common sense
and caution are factors which cannot
be built into this product, but must be
supplied by the operator.
Safety Warnings
SAVE THESE
INSTRUCTIONS.
Page 2
Advertisement
