Configure the SL2100
At Nodes 2 & 3 use SLNet Remote Trunk Access – Trunk Group Routing for Extensions to define the trunk
route used for each night mode that will be used for local extensions when dialling the trunk access code.
We will use Route 1 and route via Trunk Group 101 – this will send the trunk access call to Node 1Extn
Define the route to be used
for each night mode
At Nodes 2 & 3 use SLNet Remote Trunk Access – Trunk Group Routing to define the trunk group that will
be targeted by trunk route 2.
In our example we are routing the calls to Node 1, so the trunk group = 101 (Node number + 100)
Priority order2~4 are not required.
Define the trunk group.
101 = Node 1
Quick Install Guide – SL2100 SLNet rev1.0
30