Siemens COMBIMASTER CM12 Operating Instructions Manual page 4

EUROPEAN LOW
VOLTAGE & EMC
DIRECTIVES
The COMBIMASTER
product complies with the
requirements of the Low
Voltage Directive 73/23/EEC
and the EMC Directive
89/336/EEC.
The units are certified for compliance with
the following standards:
EN 60204-1 Safety of machinery -
Electrical equipment of machines
EN 60146-1-1 Semiconductor converters -
General requirements and line commutated
converters
BS EN50081-2: 1995
Standard - Industrial Environment
BS EN50082-2: 1995
Standard - Industrial Environment
The MICROMASTER Integrated product
complies with the requirements of the Low
Voltage Directive 73/23/EEC.
The units are certified for compliance with
the following standards:
EN 60204-1 Safety of machinery -
Electrical equipment of machines
EN 60146-1-1 Semiconductor converters -
General requirements and line commutated
converters
EUROPEAN MACHINERY DIRECTIVE
The MICROMASTER Integrated /
COMBIMASTER products are suitable for
incorporation into machinery.
BSI
© Siemens plc 1999 | G85139-H1731-U400-D2
General Emission
General Immunity
ISO 9001
Siemens plc operates a quality management system which complies with
the requirements of ISO 9001.
The MICROMASTER Integrated /
COMBIMASTER must not be put into service
until the machinery into which it is
incorporated has been certified to be in
compliance with the provisions of the
European Directive 89/392/EEC.
Note: Only valid for machinery to be
operated in the European Community.
COMBIMASTER – UL CERTIFICATION
UL cUL listed power conversion equipment
type 5B33 in accordance with UL508C.
For use in pollution degree 2 environment.
(Applies to inverters only)
MICROMASTER Integrated – UR
CERTIFICATION
UR cUR recognised power conversion
equipment in accordance with UL508C.
For use in pollution degree 2 environment.
This equipment must be externally cooled by a
fan, the rating of which depends on the unit
Case Size. For Case Sizes A and B, the fan
3
must provide 0.42m /min and 1.25m
respectively.
3
/min
3