Setting Alarm - Sharper Image SN005 Instructions Manual

Manual Setting
SET/LIGHT
Press and hold the button for 2 seconds to
set the target hour, minute and seconds. When hour, min-
UP DOWN
ute and seconds are flashing, press or button
UP
to adjust. When finished, press button and the watch
UP
starts the countdown. Press button again to stop the
DOWN
countdown and button to reset the countdown.
When the countdown has reached to the target time, the
alarm sounds. To stop the alarm, press any button.
Note:
The default is at 5 minutes.

Setting Alarm 1

MODE
When you are in Mode B, press the button to enter
Mode C: Alarm 1. (See Figure .) When entering the alarm
UP DOWN
mode, the on/off flashes. Press or button to
21