Auto Synchronization - Sharper Image SN005 Instructions Manual

Notes:
• Dispose of the used batteries properly, in accordance to
the environmental laws in your area.
• Press and hold the four buttons to reset the watch if it is
operating in an unfavorable way or malfunctioning.
Once the battery is installed, the receiver circuit is acti-
vated. The antenna icon on the LCD blinks. (See Figure
4.) The bars facing the antenna indicate the strength of
the radio signal: no bars mean there is no signal or a very
weak signal being received; one bar indicates a weak sig-
nal; 5 bars indicate the strongest signal. (See Figure 5.) Use
Replacing the Battery

Auto Synchronization

10