Page 1
L L e e G G u u i i d d e e d d u u P P r r o o p p r r i i é é t t a a i i r r e e Before Returning, Call Eureka Customer Service Antes de enviar de regreso, Ilame al Servico al Cliente de Eureka Avant de le retourner, appelez le service à la clientèle Eureka HELPLINE LIGNE D’AIDE...
Eureka vacuum cleaner. Inspection Carefully unpack and inspect your new Eureka vacuum cleaner for shipping damage. Each unit is tested and thoroughly inspected before shipping. For instructions regarding any shipping damage, call Eureka Customer Service HELPLINE 1-800-282-2886 immediately.
If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way. Motor Do Not Oil the motor or the brush roll at any time. The bearings are permanently lubricated and sealed. Eureka Customer Service HELPLINE 1-800-282-2886 www.eureka.com...
2) Attach Power Paw to the end of wand and hose. Vacuum must be turned off before removing debris from Power Paw. For additional assistance, call Eureka Customer Service HELPLINE. Eureka Customer Service HELPLINE 1-800-282-2886 www.eureka.com...
How to Maintain Your Vacuum Cleaner Make sure vacuum cleaner is turned off and power cord is unplugged Maintain Brush Roll – Call Eureka Customer Service HELPLINE – Part number 62365-4 Motor cam become hot with normal use. Do not remove end caps. Remove hair and threads from brush roll periodically.
What Eureka Will Do may not apply to you. Eureka will, at its option, repair or replace a defective Your relief for the breach of this warranty is limited to vacuum or vacuum part that is covered by this warranty.
After the 30 minute period, plug the vacuum back in and turn on the switch. If the vacuum still does not work, take it to a Eureka Authorized Service Center for repair. Problem Solving Make sure vacuum is turned off and power cord is unplugged.