Using Lather; Using Gel - Sharper Image CA900 Instructions Manual

1. Ensure lather can is inserted correctly into the dispenser.
(See Figure 3.) Also ensure the lather nozzle is attached to
the dispenser.
2. Press the POWER ON button on the top of the dispenser.
3. After a few minutes, the red indicator illuminates. The unit
is now ready to dispense hot lather. Hold your hand under the
dispenser nozzle. With the other hand, press the CONTROL
CAP until the proper amount of heated lather is dispensed.
1. Ensure the gel nozzle is attached to the dispenser as shown
in Figure 1.
2. Press down on the top of the dispenser. Simultaneously slide
the ADJUSTMENT switch until the top locks in place. Gel is
released into the machine to be heated.
3. To switch on, press the POWER ON button on the top of
the cap.

Using Lather

Using Gel

12