Disassembly and Assembly Instructions
9
9
1) Attatch the PBA on bottom side, and then
combine the FPCB and CONNECTOR.
2) Verify Mic on front cover's mic guide.
1) Be careful of damaging FPCB.
11
1) Hook the top side of rear to front ass'y.
1) Be careful of damaging FPCB and Mic.
1
2
3
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
10
1) Remove the GREEN TAPE of the CAMERA and REAR.
1) Remove certainly the GREEN TAPE because it is
responsible for picture quality badness.
12
①
③
1) Tighten 4 screws on rear red position.
1) Be careful of damaging FPCB.
11-6
④
②