Samsung SGH-F250 Service Manual page 69

5
1) Insert the FPCB into lower hole.
2) Combine Slide lower and upper from 1 ~ 4
1) Be careful of damaging FPCB.
2) Be careful of scratching the surface of handset.
7
1) Assembling the FRONT and LCD ASS'Y, be
careful of dameging FPCB.
1) Be careful of damaging FPCB..
4
3
1
2
2) Suspends and
assembles the
FRONT top portion
HOOK
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Disassembly and Assembly Instructions
6
①
③
2) Attach the LOWER SHEET on the top side LOWER.
1) Be careful of scratching the surface of handset.
8
1) Tighten 4 screws on
the FRONT side.
1) Be careful of damaging FPCB/CONNENTOR.
11-5
④
1) Tighten 4
screws on the
Lower side.
②
1) Put the Keypad on
front cover's
right position.