Product Feature Identifi Cation - Tannoy CMS 3.0 Series Quick Start Manual

8 CMS 3.0 Series

Product Feature Identifi cation

IMPORTANT NOTE: Drawings for each loudspeaker below are generic and apply to the loudspeaker types specified. Some variations will be apparent in some models,
but differences are not critical for installation purposes except as noted.
Blind Mount
The blind-mount models are supplied with a pre-fitted backcan. Above applies to all models as well any others that do NOT have a "PI" suffix.
Pre-install
A pre-install (PI) unit is shown without the optional pre-install backcan.
Pre-install backcan
Optional pre-install (PI) backcan for PI models.
NOTE: The CMS 603DC/ICT and CMS 803DC models have the transformer pre-attached to the inside of the backcan. The CMS 503DC/ICT has the transformer
pre-attached to the loudspeaker assembly.
Accessories
Standard Accessories
C-Ring
Grille
Paint Mask
Optional Accessories
Plaster (mud) ring
Quick Start Guide 9
Tile-bridge kit
Note: A tile-bridge kit
must always be used
when installing into
suspended ceiling tiles
Cut-out template
60 W Transformer
Note: For use with CMS
803 PI in distributed lines
without backcans.