General Control - Sharp CD-ES700 Operation Manual

General control

CD-ES700
CD-ES77
! To turn the power on
Press the ON/STAND-BY button to turn the power on.
After use:
Press the ON/STAND-BY button to enter the power stand-by
mode.
! Illumination light control
When the power is turned on, light illuminates around the display. To
turn on/off the light, hold down the CLEAR/DIMMER button on the
remote control more than 2 seconds.
14
! Volume control
Main unit operation:
When the VOLUME control is turned
clockwise, the volume will increase.
When it is turned counterclockwise, the
volume will decrease.
Remote control operation:
Press the VOLUME (+ or -) button to in-
crease or decrease the volume.
! X-Bass control
When the power is first turned on, the unit
will enter the extra bass mode which em-
phasizes the bass frequencies, and "X-
BASS" will appear. To cancel the extra
bass mode, press the X-BASS/DEMO (X-
BASS) button.
! Equalizer
When the EQUALIZER (EQUALIZER MODE) button is pressed, the
current mode setting will be displayed. To change to a different
mode, press the EQUALIZER (EQUALIZER MODE) button repeat-
edly until the desired sound mode appears.
During CD/TUNER/TAPE mode During GAME/VIDEO mode
The sound is not
FLAT
modified.
Bass and treble
ROCK
are emphasized.
CLASSIC Treble is cut a little.
Bass and treble are
POPS
slightly emphasized.
V o c a l s ( m i d r a n g e
VOCAL
tones) are emphasized.
Treble is slightly
JAZZ
emphasized.
0 .....
30 MAXIMUM
The sound is not
FLAT
modified.
Bass and treble
ROCK
are emphasized.
Treble is cut a
CLASSIC
little.
Bass is empha-
ACTION
sized.
Vocals and treble
SPORTS
are emphasized.
Bass and treble are
RACING
emphasized more.