Playing A Disc - Sharp SD-HX600 Operation Manual

Playing a disc

SD-HX600
ENGLISH
Volume control (See page 20.)
E-21
Main unit
! Playback
" Turn on the AV selector.
" For a wide-screen TV, set the video output to
" Turn on the TV, and switch the input to the "VIDEO 1", "VIDEO 2", etc. according-
ly.
1
Turn on the power and press the
DVD button to set the input to "DVD".
You can also use the button on the main unit.
2
Press the OPEN/CLOSE button to
open the disc door.
3
Insert a disc.
To avoid damage, insert the disc carefully.
4
Press the OPEN/CLOSE button to
close the disc door.
Some discs play automatically.
5
If you cannot start playback in step 4, press the
When you press the button with the disc door open, it closes and playback
starts.
" You can also use the
or button on the main unit.
" To open/close the disc door, press the
" The remote control may not work while the disc door is open. Move closer to the
main unit, or aim the remote control from different angles.
" Do not attempt to close the disc door manually by pushing or forcing the sisc door
closed. The disc door must be closed using the OPEN/CLOSE or
main unit or the remote control.
(see page 45).
Label side
Tab
Please place the
disc with the label
side towards the
door with the
bottom of the disc
resting inside the
door tabs.
D D V
button.
button on the main unit/remote control.
buttons on the