TRENDnet TEW-731BR User Manual page 35

TRENDnet User's Guide
o
Open Protocol – Select the protocol to be forwarded to the device.
TCP, UDP, or you can select Both to choose both TCP and UDP.
o
Start Relate Port – Enter the beginning port range to be forwarded to
the device. (e.g. 2000,2069,2081,2200).
o
End Relate Port – Enter the ending port range to be forwarded to the
device. (e.g. 2038,2069,2081,2210).
Note: Please refer to the device documentation to determine which ports and protocols
are required.

Apply Changes – Saves a new special application.
To delete an existing application, click on the Delete button in the Current Port
Triggering Table list.

Delete – Removes an existing special application.
© Copyright 2016 TRENDnet. All Rights Reserved.
TEW-731BR
33