TRENDnet TEW-731BR User Manual page 32

TRENDnet User's Guide
3. Review the virtual server settings.

Usual Service Name – Selecting an option from the drop down list will
automatically enable virtual server with pre-defined settings. To disable, select
AUTH from the drop down menu.

User-defined Service Name – Enable and manually input your own virtual
server

Protocol – Select the protocol required for your device. TCP, UDP.
Note: Please refer to the device documentation to determine which ports and
protocols are required.

LAN Open Port – Enter the port number required by your device. Refer to the
connecting device's documentation for reference to the network port(s)
required.

WAN Port – Enter the port number used to access the device from the
Internet.
Note: The WAN Port can be assigned a different port number than the Private Port
(also known as port redirection), however it is recommended to use the same port
number for both settings. Please refer to the device documentation to determine
which ports and protocols are required.

LAN IP Address – Enter the IP address of the device to forward the port (e.g.
192.168.10.101).
Note: You should assign a static IP address to the device or use DHCP reservation to
ensure the IP address of the device does not change.
© Copyright 2016 TRENDnet. All Rights Reserved.

Apply Changes – Saves a new virtual server entry.

Delete – Delete the current virtual server entry.

Disable – Disable the current virtual server entry.

Enable – Enable the current virtual server entry
Example: To forward TCP port 80 to your IP camera
1. Setup DynDNS service (See DynDNS section).
2. Access TRENDnet IP Camera management page and forward Port 80 (see
product documentation)
3. Make sure to configure your network/IP camera to use a static IP address or you can
use the DHCP reservation feature (see "Set up DHCP reservation" on
Note: You may need to reference your camera documentation on configuring a static IP
address.
4. Log into your router management page (see "Access your router management page"
on page 22).
5. Click on Advanced, and click on Virtual Server.
TEW-731BR
page 25).
30