Integrated Website Showing Device And Connection Data; Accessing The Web Server Locally Via The Service Interface; Via Dial-Up Connection; Installing The Modem For Access To The Service Interface - Siemens SINAUT MD740-1 User Manual

Table of Contents

Advertisement

5

Integrated website showing device and connection data

The SINAUT MD740-1 has an integrated Web server. The Web server provides a
website with information on device and connection data. There are different ways of
accessing the website using a Web browser:
locally via the service interface - see page 83
locally via the application interface (10/100 BASE-T connector) - see page 86
from a remote computer via the GPRS network (network-dependent) - see page 87.
5.1

Accessing the Web server locally via the service interface

Via dial-up
connection:
Dial-up no.: *98#
User name.: service
Password: service
Installing the
modem for access
to the service
interface
SINAUT MD740-1
To address the SINAUT MD740-1 via its service interface the
following conditions must be fulfilled:
The computer you intend to use must be connected to the
service interface of the SINAUT MD740-1 via one of its COM
ports.
An appropriate dial-up connection must be set up on this
computer (see below). This must contain the following data:
- the character string for dialling up the service interface: *98#
- user name and password: service in each case
- modem or device via which the connection is to be established:
TAINY GMOD Service. The modem driver file must have been
installed previously (see below).
To install the modem driver under Windows XP, proceed as
follows.
Installation under Windows 98 or Windows 2000 is done
accordingly
!
When using Windows 2000 or XP you must be registered as the
administrator. In this case, make sure that no other modem
drivers have been or are installed for the selected interface.
1. Click on Start, Control Panel so that the Control Panel
dialogue box appears.
Switch to "Classic View ".
2. Double-click on the Phone and modem options icon.
3. In the Phone and modem options dialogue box, click on the
Add... button in the Modems tab.
4. The Add New Hardware Wizard for the installation of a new
modem appears.
Follow the instructions of the Add New Hardware Assistant:
Integrated website showing device and connection data
83 von 105

Advertisement

Table of Contents
loading

Table of Contents