Samsung SP-L300 Owner's Instructions Manual page 23

First, check that the AV device and your projector are turned off.
Connect the [PC IN (1 or 2)] terminal at the back of the projector to the Component terminal of your AV device using a D-
Sub/Component cable (Not supplied).
- For supported input signals, refer to the
Connect the [PC 1/DVI AUDIO IN] or [AUDIO IN 2] terminal at the back of the projector and the Audio out terminal of your
AV device using an audio cable (Not supplied).
Connecting using a Video/S-Video cable
First, check that the AV device and your projector are turned off.
Connect the [VIDEO] or [S-VIDEO] terminal and the AV device using a Video cable (Not supplied) or S-Video cable (Not
supplied).
- For supported input signals, refer to the
Connect the [AV IN R-AUDIO-L] terminal at the back of the projector and the Audio out terminal of your AV device using an
audio cable (Not supplied).
"AV Timing(D-Sub)".
"AV Timing(VIDEO/S-VIDEO)".