ooma Yealink CP860 Quick Installation Manual

Yealink CP860
Quick Installation Guide

Package Contents

Yealink CP860
IP conference phone
Step 2 Power Phone
Connect the phone power supply.
Ooma-Insert-Yealink-CP860-R2-blingual.indd 1
Ethernet cable Power adapter
Step 3 Start Up Phone
Use the Ethernet cable to connect the
INTERNET port on the back of the Yealink
CP860 IP phone to an available wired
Internet connection. The phone will begin
its initialization process automatically. This
process will take several minutes, during
which the IP phone may restart a few times.
Once you see your extension number
(e.g. x119) displayed on the screen, the
phone is ready to make and receive calls.
For best results, place the phone in the
center of the room in which it will be used.
Introduction
Integrating a Yealink CP860 IP conference phone with
Ooma Office is quick, and can be accomplished in just
a few simple steps.
Step 1 Register Phone Online
You must first register the
Yealink CP860 IP phone to your Ooma
Office account by visiting
http://office.ooma.com/add_ip_phone
and following the steps on the screen.
Step 4
You may connect up to two Yealink CPE80
expansion microphones.
Note: You may order Yealink CPE80
expansion microphones at
http://office.ooma.com/ip_phones
Optional: Hook Up
Expansion Microphones
Accessories
710-0156-100
8/16/16 11:47 AM