Yealink IP Phone
Quick Installation Guide
Package Contents
Yealink IP phone
Step 2
Assemble Phone
Follow the instructions in the phone's user manual to assemble
the phone and connect the power supply.
Ooma-Insert-Yealink-IP Phone-Bilingual Aug 2016-R2.indd 1
Ethernet cable
Power adapter
Introduction
Integrating a Yealink IP phone with Ooma Office is quick,
and can be accomplished in just a few simple steps.
By following the instructions below to provision the
phone, you can put it into service immediately without
any manual configuration.
Step 1
Register Phone Online
In order to get started, you must first
register the Yealink IP phone to your
Ooma Office account. You can do this by
visiting the following URL and following
the steps on the screen:
http://office.ooma.com/add_ip_phone
Step 3
Start Up Phone
Use the Ethernet cable that came with the phone to connect the
INTERNET port on the back of the Yealink IP phone to an available
wired Internet connection.
The start up process will take several minutes, during which the
IP phone may restart a few times.
Once you see your extension number (e.g. x101) displayed on the
screen with a solid black phone icon and your name, the Yealink IP
phone is ready to place and receive calls!
710-0151-200
8/16/16 4:50 PM