Sharp Notevision PG-A20X Operation Manual page 58

Sharp operation manual lcd projector pg-a20x
Hide thumbs Also See for Notevision PG-A20X:
Table of Contents

Advertisement

Replacing the Air Filter
5
Clean the air filter.
• Clean the dust off the air filter and cover
with a vacuum cleaner extension hose.
6
Replace the air filter.
• Place the air filter underneath the tabs
on the filter/lamp unit cover.
7
Replace the filter/lamp unit
cover.
• Align the tab on the filter/lamp unit cover
(1) and place it while pressing the tab
(2) to close it. Then tighten the user
service screw (3) to secure the filter/
lamp unit cover.
Note
• Be sure the filter/lamp unit cover is
securely installed. The power will not turn
on unless it is correctly installed.
• If dust or dirt has collected inside the rear
and bottom air filters (not removable), clean
the filter with a vacuum cleaner extension
hose.
-54
PG-A20X_E_PDF_P51_62.p65
54
2
Tab
User service screw
03.4.23, 9:59 AM
1
3

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pg a20x - notevision xga lcd projector

Table of Contents