Setting Up The Projector; Environment; Picture - Sharp Notevision XG-C335X Operation Manual

Setting Up the Projector

Setting Up the Projector
For optimal image quality, position the projector perpendicular to the screen with the projector's feet flat
and level. Doing so will eliminate the need for Keystone correction and provide the best image quality. (See
page 32.)
Standard Setup (Front Projection)
■ Place the projector at the required distance from the screen according
to the desired picture size. (For details, refer to the "SETUP MANUAL" con-
tained on the supplied CD-ROM.)
Example of standard setup
Side View
Screen
H
Ceiling-mount Setup
■ It is recommended that you use the optional Sharp ceil-
ing-mount bracket for this installation. Before mounting
the projector, contact your nearest Sharp Authorized Pro-
jector Dealer or Service Center to obtain the recom-
mended ceiling-mount bracket (sold separately).
• For the U.S.A.: AN-XGCM55 ceiling-mount bracket, its
AN-EP101B extension tube and AN-JT200 universal
bracket, adaptor for non-level ceiling installation.
• For countries other than the U.S.A.: AN-60KT ceiling-
mount bracket, its AN-TK201 and AN-TK202 extension
tubes.
■ Invert the image by setting "Ceiling + Front" in "PRJ Mode".
See page 52 for use of this function.
-18
L: Projection distance
Base line:
Horizontal line passing through
the lens center
Lens center