Auto Sync (Auto Sync Adjustment); Freezing A Moving Image; Selecting The Picture Mode; Displaying An Enlarged Portion Of An Image - Sharp Notevision PG-F212X Operation Manual

Auto Sync
(Auto Sync Adjustment)
Auto Sync function works when detect-
ing input signal after the projector turns
on.
Press AUTO SYNC to manually adjust
with Auto Sync function.
Note
• When the optimum image cannot be achieved
with Auto Sync adjustment, use the help menu
for manual adjustments. (See page 48.)

Freezing a Moving Image

1
Press FREEZE.
• The projected image is frozen.
Press FREEZE again to return to
2
the moving image from the cur-
rently connected device.

Selecting the Picture Mode

You can select the appropriate picture
mode for the projected image, such as
movie or video game.
Press PICTURE MODE.
• When pressing PICTURE MODE, the picture
mode changes in the following order:
STANDARD PRESENTATION
Note
• See page 40 for details on the picture mode.
* "sRGB" is displayed only when RGB signal is
input.
*
MOVIE GAME sRGB
Displaying an Enlarged
Portion of an Image
Graphs, tables and other portions of
projected images can be enlarged. This
is helpful when providing more detailed
explanations.
1
Press MAGNIFY on the remote
control.
• Enlarges the image.
• Pressing or
or reduces the projected image.
Note
.
Press
1 2 3
.
Press
• You can change the location of the en-
larged image using P, R, O and Q.
2
Press RETURN on the remote con-
trol to cancel the operation.
• The magnification then returns to ×1.
Note
• The selectable magnifications differ
depending on the input signal.
• In the following cases, the image will
return to the normal size (×1).
- When switching the INPUT mode.
- When RETURN has been pressed.
- When the input signal is changed.
- When the input signal resolution and
refresh rate (vertical frequency)
change.
- When the Resize mode is changed.
- When the Picture mode is changed.
- When the Progressive mode is changed.
MAGNIFY enlarges
4
33