Advertisement
INSPECTION AND MAINTENANCE
Before inspection or maintenance, make sure all switches are turned off
and the AC Cord is unplugged.
Wipe Monitor Housing with a soft clean cloth or sponge. Follow same procedure
with cleaning Receivers and Adapters. Do not immerse Camera, Receivers,
cord, or plug in water.
Problem
W
i
e r
e l
s s
R
o
o
m
M
o
n
t i
r o
1.
will not start
2.
3.
4.
Follow all safety precautions whenever diagnosing or servicing the
appliance. Disconnect power supply before service.
NOTE: There are no replacement parts for this product.
Record Product's Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
SKU 66704
For technical questions, please call 1-800-444-3353.
TO PREVENT SERIOUS INJURY FROM ACCIDENTAL
OPERATION OR ELECTRIC SHOCK:
Troubleshooting
Possible Causes
No power at outlet for AC Cord.
Cord not connected.
Battery needs recharging.
Transmitter and remote are not on
the same frequency.
Likely Solutions
1.
Check power at outlet.
2.
Check that AC cord is plugged in.
3.
Recharge Battery. 5 Hours is
recommended if the Monitor is in
"OFF" position. If the Monitor is
"ON" and being used, 10 hours is
needed to complete the charging
process.
4.
Select matching frequency
channels.
Page 6
Advertisement
