Table of Contents
Advertisement
8.
WARNING: People with pacemakers should consult their physician(s) before
using this product. Operation of electrical equipment in close proximity to a heart
pacemaker could cause interference or failure of the pacemaker.
When unpacking, check to make sure all the parts shown on the Parts List (page 8) are
included. If any parts are missing or broken, please call Harbor Freight Tools at the
number shown on the cover of this manual as soon as possible.
ASSEMBLY AND OPERATING INSTRUCTIONS
NOTE: For additional references to the parts listed below, refer to the Assembly Dia-
gram (page 8).
To Mount The Tire Patching Machine On A Workbench:
1.
Caution: Make sure the Tire Patching Machine is securely mounted on a flat,
level, sturdy, workbench capable of supporting the weight of the Tire Patching
Machine, tools, accessories, and work piece.
2.
There are two 1/2" wide mounting slots located at the bottom right and left sides
of the Main Frame (part #3). (See Assy. Diagram.)
3.
With assistance, set the Tire Patching Machine in the desired location on the top
of the workbench. Using the two mounting slots as a template, mark the two
holes that are to be drilled through the top of the workbench. Then, temporarily
remove the Tire Patching Machine.
4.
Using a drill and 1/2" drill bit (not provided), drill the two previously marked holes
completely through the top of the workbench.
5.
Align the two 1/2" mounting slots at the right and left ends of the Main Frame
(part #3) with the two previously drilled holes in the workbench. Then, firmly
secure the Tire Patching Machine to the workbench with two appropriate length
1/2" bolts, two lock washers, and two nuts (not provided).
To Prepare The Tire Tube For Patching:
1.
Carefully remove the tube valve stem from the tire tube, and allow all of its air to
escape. Then, remove the tube from the tire.
SKU 46616
UNPACKING
PAGE 5
REV 03/04
Advertisement
Table of Contents
