Sharp MD-MT821 Operation Manual page 28

n Move
1
Play the track to be moved, and press
the )I1 button.
2
Press the EDIT button to select "MOVE".
To move the
fifth track
3
Press the ENTER/SYNC button.
4
Move the HI REC LEVEL w shuttle
switch to select the direction to move.
(Checking the
movement)
5
Press the ENTER/SYNC button again.
will be paused at the beginning of the
track.
Note:
tracks which are affected by the move
will be assigned new track numbers au-
tomatically.
Example: When moving the fifth track.to
the third track, the old third track will be-
come the new fourth track and the old
fourth track will become the new fifth
track.
(To move
it to the
third track)
27
1
Start playing the track you want to di-
vide into two. Press the )I1 button at
the point where you want to divide the
track.
VIDE".
To
divide the
fourth track
3
Press the ENTER/SYNC button.
(Confirming the split)
4
Press the ENTER/SYNC button again.
l
The track will be divided into two
tracks, and the unit will be paused at
the beginning of the second of the two
tracks.
l
The numbers of the tracks which
come after the divided track will be
increased by one automatically.
Notes:
When a track that has a name is divided,
the two new tracks will have the same
name. However, in the TOC FULL con-
dition, the second track may not be
named.
Each disc can hold up to 255 tracks.
However, even if the number of assigned
tracks has not reached 254, it might not
be possible to make any further divisions
of tracks.