Installing/mounting
3.5 Mounting to a bend or snub pulley
Dimensions in mm (inch)
①
Bend or snub pulley
②
3/8" drilled hole for arrestor rod
③
Stringer
Note
When mounting to a bend or snub pulley only a 3/8 inch (10 mm) drilled hole is required for
the arrestor rod.
14
④
Tension spring
⑤
Arrestor rod (cut to suit)
⑥
Flexible conduit
Operating Instructions, 06/2018, A5E4505935-AA
⑦
Pulley bearing
SITRANS WS300