Before Operating - Sharp R-402J Operation Manual

B E F O R E O P E R A T I N G
• Before operating your new microwave oven make
sure you read and understand this operation manual
completely.
• Before the oven can be used, follow these procedures:
1. Plug in the oven. The oven display will then begin
fl ashing 8 8 : 8 8 .
2. Touch the STOP/CLEAR pad.
: will appear.
3. Set clock.
TO SET THE CLOCK
• Suppose you want to enter the correct time of day
12:30 (A.M. or P.M.).
P R O C E D U R E
TIMER
1
CLOCK
Touch TIMER/CLOCK pad.
2
1 2 3
Enter the correct time
of day by touching the
numbers in sequence.
TIMER
3
CLOCK
Touch TIMER/CLOCK pad
again.
This is a 12 hour clock. If you attempt to enter an
incorrect clock time, ERROR
Touch the STOP/CLEAR pad and re-enter the time.
• If the electrical power supply to your microwave oven
should be interrupted, the display will intermittently
show 8 8 : 8 8 after the power is reinstated. If this
occurs during cooking, the program will be erased.
The time of day will also be erased. Simply touch
STOP/CLEAR pad and reset the clock for the correct
time of day.
D I S P L A Y
:0
The colon (:) will fl ash.
0
12:30
12:30
will appear in the display.
STOP/CLEAR
Touch the STOP/CLEAR pad to:
1. Erase if you make a mistake during programming.
2. Cancel timer.
3. Stop the oven temporarily during cooking.
4. Return the time of day to the display.
5. Cancel a program during cooking, touch twice.
TIME COOKING
Your oven can be programmed for 99 minutes
99 seconds (99.99). Always enter the seconds after the
minutes, even if they are both zeros.
• Suppose you want to cook for 5 minutes at 100%.
P R O C E D U R E
1
5 0
Enter cooking time.
START
2
Touch START pad.
11
D I S P L A Y
5.00
0
COOK
5.00
COOK