Electrical Cabling; Figure 42 Connecting The Main Electrical Power In The Electrical Cabinet - HP Indigo Division Series Instruction For Use & Installation Instructions

Electrical cabling

1. Remove the four screws securing the floor-plates of both main electrical cabinets.
Remove the floor-plates.

Figure 42 Connecting the main electrical power in the electrical cabinet

4
1 Locking bracket
2, 3 Main power connector
4 Direction of closing locking bracket
2. To install mains power connectors (Figure 42):
a. Insert the cable connector to its female connection at the cabinet.
b. Pull and turn the locking bracket until the mains power connector is locked.
CA294-03070 rev 00
Installation Manual
1
2
3
page 58 of 153