Table of Contents
Advertisement
must be the only wire connected to the equipment's grounding system and must
never be attached to an electrically "live" terminal. (See Figure A.)
3.
Your welding equipment must be plugged into an appropriate outlet, properly
installed and grounded in accordance with all codes and ordinances. The plug
and outlet should look like those in the following illustration. (See Figure A.)
FIGURE A
DOUBLE INSULATED TOOLS: TOOLS WITH TWO PRONG PLUGS
1.
Tools marked "Double Insulated" do not require grounding. They have a special
double insulation system which satisfies OSHA requirements and complies with
the applicable standards of Underwriters Laboratories, Inc., the Canadian
Standard Association, and the National Electrical Code. (See Figure B.)
2.
Double insulated tools may be used in either of the 120 volt outlets shown in the
following illustration. (See Figure B.)
FIGURE B
SKU 55594
For technical questions, please call 1-800-444-3353.
THREE PRONG
PLUG
THIS PRODUCT
USES A
THREE PRONG PLUG
120 VOLT
GROUNDED
ELECTRICAL OUTLET
Page 10
Hide quick links:
Advertisement
Table of Contents
