Memorex iWakeUp Mi4014 User Manual page 15

OPERATION (CONTINUED)
TO SET OR RESET THE ACTUAL TIME
1
SNOOZE
With the power off, press and hold
the TIME SET/DISPLAY button;
the time will blink.
3
SNOOZE
Press the TIME SET/DISPLAY
button (or wait
seconds) and the time will be set.
All manuals and user guides at all-guides.com
approx. 15
14
2
SNOOZE
Within 15 seconds, press the MIN
(Minute) button 1 to set the
present minute and the HOUR
button 2 to set the present hour.
Make sure to set the correct
AM/PM setting.
DST (DAYLIGHT SAVINGS TIME)
1
For your convenience, there is a DST
(Daylight Savings Time) switch
located on the rear of the unit. Slide
the switch to +1 to add an hour to the
actual time or slide the switch to -1 to
subtract an hour from the actual time.
2
1