Erase Programme - Sharp LC-46GD7X, LC-52GD7X Operation Manual

Basic adjustment settings (Analogue)

Erase Programme

The individual programme can be erased.
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Setup".
3
Press a/b to select "Programme Setup",
and then press ENTER.
If you already set the password, enter it here.
• See page 39 for setting a password.
4
Press a/b to select "Erase Programme",
and then press ENTER.
5
Press c/d to select "Yes", and then press
ENTER.
6
Press a/b/c/d to select the channel you
want to erase, and then press ENTER.
• A message screen pops up.
7
Press c/d to select "Yes", and then
press ENTER to erase the selected
programme. All the subsequent
programmes move up.
8
Repeat the steps 6 and 7 until all desired
channels are erased.
Erase programme menus
01 SAT.1 02 Pro7
06 07
11 12
16 17
01 SAT.1 02 Pro7
06 07
11 12
16 17
01 SAT.1 02 KABEL
06 07
11 12
16 17
01 SAT.1
03 KABEL 04 05
08 09 10
13 14 15
18 19 20
Next
02 Pro7
03 KABEL 04 05
08 09 10
13 14 15
18 19 20
Next
02 KABEL
03 04 05
08 09 10
13 14 15
18 19 20
Next
25