Sharp Aquos LC-46D92U Operation Manual page 53

Other viewing options
1
2
1
2
■ Cable control buttons
When the FUNCTION is set to CBL/SAT, the cable
converter connected to the TV can be operated using
1 to 4.
1 SOURCE POWER
Turns the cable converter power on and off.
2 0–9
Press a button (or buttons) that corresponds to the
channel that you wish to watch.
3 FLASHBACK *
Press to switch between the current channel and the
3
channel you were watching immediately before.
CH r / s
4
4
Press CH r or CH s to tune in a higher or lower
channel.
* Some manufacturers do not preset FLASHBACK.
NOTE
• CABLE and SAT cannot be selected at the same time.
■ SAT control buttons
1 SOURCE POWER
Turns the cable converter power on and off.
0–9, • (DOT)
2
Press a button (or buttons) that corresponds to the
channel that you wish to watch.
ENTER, a / b / c / d
3
ENTER: Press to activate the selected function.
a / b / c / d : Press the button to select items on the
NOTE
• CABLE and SAT cannot be selected at the same time.
3
SAT GUIDE screen or SAT MENU screen.
51