View Mode For 4:3 Programs; View Mode For Hd Programs - Sharp Aquos LC-42D62U Operation Manual

Useful adjustment settings
The follovving modes are available for HD programs.
Press
VIEW MODE.
• The View Mode menu displays.
• The menu lists the View Mode options
selectable for the type of video signal currently
being received.
s
When using Dot by Dot, it is possible to see noise or
bars around different outer portions of the screen. Please
change view rnode to correct this.
Dot by Dot (1080i/p only):
Detects the resolution of the signal and displays an image with
the same number of pixels on the screen. When a 720p signal
is being input, the image will be delivered in full screen.
Stretch:
Suitable for viewing wide-screen 1.78: 1 aspect ratio program,
stretch mode will still show very thin black bands at the top
and bottom of the screen.
Zoom:
Suitable for viewing wide-screen 2.35:1 aspect-ratio programs
in full screen.
S.Stretch (Smart stretch):
Suitable for stretching 4:3 programs to fil! the screen.
FREEZE
MENU
o
0
8@8
EO
_;.iP'RORN
AUDIO
o
FUNCTION
o
LIGHT
@J
8
o
•
8 CB
REC
o
0
8 8
g T;~ CB~SAT ~e:
pO 0 0
SOURCE
8
8
Press
VIEW MODE
or
~/T
while the View
Mode menu is still on the screen.
• You can sequentially select a View Mode that
has its own aspect ratio.
Side Bar:
Suitable for viewing conventional 4:3
programs in their normal format.
o
o
S.Stretch (Smart stretch):
Suitable for stretching 4:3 programs
to fill the screen.
Zoom:
Suitable for viewing wide-screen
2.35: 1 anamorphic DVDs in full
screen.
Stretch:
This mode is useful for 1.78: 1 DVDs.
When viewing 1.85:1 DVDs, stretch
mode will still show very thin black
bands at the top and bottom of the
screen.
@)-
33