Sharp Aquos LC-32D62U Operation Manual page 9

QUICK REFERENCE
STOP! To safely remove the AQUOS television from the box
• It's best to use 2 people to remove the AQUOS television for stability.
• Lift onto installation location as the diagram illustrates.
Ventilation & Cleaning Tips
Keep your AQUOS television in a well ventilated area and make sure not to place it by a heat source or use near
water. The AQUOS television is designed for AC use only and should be used with supplied AC cord.
Clean the screen by spraying a soft lint free cloth with water to lightly moisten. Gently wipe and
avoid pressing on the screen. To clean the outer cabinet, use the same method. Do not use
liquid or aerosol cleaners.
The screen is glass and can be scratched or broken when dropped or impacted.
QUICK INSTALLATION TIPS
Attach your antenna to the back of the AQUOS
1
television. (See page 12.)
Connect the AC plug for the AQUOS television
2
into the AC outlet.
• Place the TV close to the AC outlet, and keep the power
plug within reach.
NOTE
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT
TOUCH UN-INSULATED PARTS OF ANY CABLES
WITH THE AC CORD CONNECTED.
Place the Ferrite core in the space indicated in
3
the below fi gure and bundle the cords properly
with cable clamp and a cable tie.
How to turn on the AQUOS television for the
4
fi rst time.
A) Press POWER on AQUOS television.
B) POWER indicator on the front of the
AC outlet
NOTE
• Speakers cannot be detached from the TV.
• TV angle cannot be adjusted.
Ferrite core
AQUOS television lights GREEN.
POWER indicator
POWER
7