Angle Bending
Step 1. Mark the work piece where you want to bend the material.
Step 2. Place material above the MOVING CUTTER PLATE (#11) as shown in Figure 6.
Upper Braking
Die #12
Moving Cutter
Pate #11
Step 3. Align the bending mark with the front edge of the UPPER DIE.
Step 4. Rotate the HANDLE (#18) until the desired angle has been formed. Use a protractor or
other measuring tool to ensure accuracy.
Page 8 -- SKU: 05907
Figure 6 — Angle Bending
REV 11/02