Pc Sound Select (For Pc Mode); Useful Features; Ch-Setting - Sharp Aquos LC-20B8U Operation Manual

PC SOUND SELECT (for PC mode)

You can switch the sound mode while the LCD TV set is
connected to the PC. Make sure the PC mode is selected
before making this setting.
1
Press MENU to display the Menu screen.
2
Press \/| to select "AUDIO".
3
Press '/" to select "PC SOUND SELECT", and press
ENTER.
4
Press '/"/\/| to select the desired setting, and press
ENTER.
I N P U T 1
I N P U T 2
I N P U T 3
5
Press MENU to exit.
A
• "INPUT4" cannot be set when "INPUT4 SELECT" is set to
"OUT FAO" or "OUT
I N P U T 4
I N P U T 5 ( P C )
T V
VAO" in the SETUP menu.

Useful Features

CH-SETTING

■ EZ SETUP
When you move to an area with different broadcasting
signals, you may have to set the channel numbers and
the time with the EZ SETUP function. To activate EZ
SETUP, perform the following procedure.
1 Press '/" to select "CH-SETTING" in the SETUP screen (see
page 18), and press ENTER.
2 Press '/" to select "EZ SETUP", and press ENTER.
3 Press '/" to select "YES", and press ENTER.
Refer to page 13 for more information on EZ SETUP.
■ Setting the AIR/CABLE
It is necessary to set the receiving mode to AIR or CABLE
channels to receive locally broadcast TV programs.
1
Press MENU to display the Menu screen.
2
Press \/| to select "SETUP".
3
Press '/" to select "CH-SETTING", and press ENTER.
4 Press '/" to select "AIR/CABLE", and press ENTER.
Press '/" to select the desired setting, and press ENTER.
E Z S E T U P
A I R / C A B L E
C H S E A R C H
C H M E M O R Y
5
Press MENU to exit.
A
• Receivable channels of the LCD TV set are:
AIR channels: CABLE channels:
VHF: 2 through 13. 1 (HRC and IRC)
UHF: 14 through 69. 2 through 125 (STD, HRC and IRC)
A I R
C A B L E
23