Table of Contents
Advertisement
KWR101830/01B
2.4 RF Broken Link
RF link is broken when the RF (2.4G) connection is lost or when the receivers sleep or during system
shutdown states (S3, S4 or S5) or due to out-of-range.
2.5 RF ACTIVE / SLEEP
From RF ACTIVE >> SLEEP User action
No key-press for less than 15 seconds.
No motion senses for about 15 seconds.
2.6 RF Auto Connection
When the RC wakes up or resumes from SLEEP mode or come back within range of a powered-on
paired receiver, the RF link will be reconnected automatically. No RF re-pairing is needed.
2.7 RF Out-of-Range
When the RF link is broken or out-of-range and is stationary, the RC goes to SLEEP immediately to
conserve power.
Status :Draft, For Review
Philips Home Control
Remote Control action
RF goes to SLEEP. In SLEEP mode, all LEDs are OFF.
RF goes to SLEEP. In SLEEP mode, all LEDs are OFF.
Page 6 of 14
Manual (Draft Version)
Philips Proprietary &Confidential
Company Restricted
Advertisement
Table of Contents
