Sharp Aquos LC 45GD7U Operation Manual page 28

Watching TV (TV Guide On Screen)
Delete recording
1
Repeat steps 1 and 2 in Using SCHEDULE
function.
2
Press a/b to select the program you want
to delete.
3
Press MENU to display "Schedule Options".
4
Press a/b to select "delete recording", and
then press ENTER.
• Confirmation screen displays.
5
Press a/b to select "yes" or "no".
Edit recording
1
Repeat steps 1 to 2 in Using SCHEDULE
function.
2
Press a/b to select the program you want
to edit.
3
Press MENU to display "Schedule Options".
4
Press a/b to select "edit recording", and then
press ENTER to display "Record Options".
• You can change the setting items again.
5
Press ENTER to highlight "schedule
recording".
6
Press ENTER again to exit.
Edit reminder
1
Repeat steps 1 to 2 in Using SCHEDULE
function.
2
Press a/b to select the program for which
you want to set the reminder.
3
Press MENU to display "Schedule Options".
4
Press a/b to select "edit reminder", and then
press ENTER to display "Remind Options".
• You can change the setting items again.
5
Press ENTER to highlight "schedule
reminder".
6
Press ENTER again to exit.
28
New manual recording
Aside from setting recordings using the program
LISTINGS menus, you can also define the schedule of
recordings manually by following the steps below.
1
Press a/b to select the program you want
to record.
2
Press MENU to display "Record Options".
3
Press a/b to select "new manual recording"
and then press ENTER.
• "Record Options" screen displays.
Setup
Selectable items
items
date
—
start
—
end
—
channel
—
input analog/digital air/
digital cable/input 1/
input 2/input 3
recorder VCR/i.LINK
once/weekly/daily/off
frequency
4
Press ENTER to highlight "schedule
recording".
5
Press ENTER again to exit.
NOTE
• The program set to be manually recorded is listed by
channel number in the SCHEDULE.
Description
Set a date to record
Set a start time to
record
Set an end time to
record
Set a channel to
record using 0–9
Set the external
recording device or
antenna source
Select a recorder you
connected
Set the recording
cycle