Sharp Aquos LC 45GD7U Operation Manual page 22

Watching TV (TV Guide On Screen)
VCR setting
Connect a VCR to your TV and use the TV Guide On
Screen system's program listings to easily schedule
recordings using the one-touch recording feature.
1
Set TV Guide On Screen to control your
VCR.
Press a/b to select "Yes, setup VCR
control", and then press ENTER.
• If you select "Yes", go to the next step.
• If you select "No", setup will end.
2
This screen shows the correct way to connect
the G-LINK cable from the back of the TV to
the recording device. Make sure the G-LINK
cable is properly connected, and then press
ENTER.
3
Indicate the VCR brand name.
Press a/b to select the VCR brand, and
then press ENTER.
4
The TV Guide On Screen is now ready for
testing. Do the following:
1 Turn on your VCR and insert a tape.
2 Play the media on the VCR, and then
press ENTER.
The TV Guide On Screen system will conduct
a series of tests and when the testing is
completed the next screen will be displayed
automatically.
Do not press any buttons while testing is in
progress.
5
Confirm that your VCR has stopped
playing.
Press a/b to select "Yes", "No" or "Test this
code again", and then press ENTER.
• If you select "Yes", go to the next step.
• If you select "No", a different code is tested in
the previous screen.
• If you select "Test this code again", the same
code is tested again in the previous screen.
6
Confirm the settings.
Confirm the settings displayed on the screen
and press a/b to select "Yes, end setup"
or "No, repeat setup process", and then
press ENTER.
Press ENTER to complete the SETUP.
22
NOTE
• Up-to-date listings will begin loading over the next 24 hours
when your LCD-TV is powered off. (Do not unplug the AC
cord.)
• It may take more than one day for all eight days of listings
to update. The guide will automatically receive updates
during the period when your LCD-TV is turned off.
• To receive your channel lineup and program listings, leave
your cable box on. Your VCR and LCD-TV should be turned
off overnight. (Do not unplug the AC cord.)
• To record a TV program, make sure your cable box is on.
Put a tape in your VCR, tune the device to the Line input,
then turn the VCR off. (Do not unplug the AC cord.)
• You must redo the TV Guide On Screen system setup if
you:
- Move your LCD-TV to a new ZIP or postal code.
- Cancel cable service or change cable boxes.
- Change your VCR brand or model.
7
Press ENTER twice to watch TV.