Disengaging The Seat To Rotate Or Remove It; Adjusting The Angle Of The Steering Column - Invacare Orion Series User Manual

Invacare® Orion Series
1. To raise headrest, push the release button A and lift
headrest up to desired position.
2. To lower headrest, push the release button and lower
headrest to the desired position.

4.8 Disengaging the seat to rotate or remove it

The seat can be turned to one side to make getting in and
out of the scooter easier. The seat is also easier to remove
from this position.
The seat lever is located under the seat on the left .
Rotating the seat
1. Pull the lever A to disengage the seat.
2. Turn the seat to the side.
28
Removing the seat
1. Pull the lever A to disengage the seat.
2. Hold the seat firmly by the backrest and front edge and
remove it upwards.
Installing the seat
1. Lower the seat assembly onto the seat post.
2. Allow the seat to drop into the locked position.
3. Lift up the seat assembly to ensure the seat is secured.

4.9 Adjusting the angle of the steering column

The angle of the steering column can be adjusted to your
personal requirements to ensure a good seating position
while driving the scooter.
1603456-D